
Add to Cart
1.4 Inch DC Brushless Fan 12 Volt Axial Small Electronic Cooling Fans
Rated voltage: 3v 5v 9v 12v 14v 24v according to customer's requirement.
Air flow, air pressure and rated voltage can be customized based on customer's requirement
Bearing: Sleeve or Ball ( sleeve working time for 30,000 hours, ball working time for 50,000 hours)
Description:
Motor Protection (Selective purchasing):
-Automatic Restart.
-Reverse Polarity Protected
-Water proof for IP55
-Ic function RD ,FG AND PWM control
* Two ball bearing applying
* Applying NMB ball bearing inported from Japan
* Short lead time 1 Week after confirm order
* One- three year warrantee
Quality:
1. 100 % testing before the fan leave our factory
2. Good after services to every customer
3. We often give one-three years warranty on quality of products, and will give your refund if any quality problems occurs when you receive
A: Specifications:
Model | Bearing Type | Rated Voltage | Operating Voltage | Input Current | Input Power | Speed | Max Air Flow | Max Static Pressure | Noise | Weight | ||
Part No. | B.S | VDC | VDC | Amp | Watt | RPM | CFM | m3/min | Inch-H2O | pa | dB-A | g |
MX3510AB(S)H5 | B.S | 5 | 3.5-5.5 | 0.25 | 1.25 | 8000 | 6.51 | 0.18 | 0.16 | 39.42 | 29.00 | 10.00 |
MX3510AB(S)M5 | B.S | 5 | 3.5-5.5 | 0.18 | 0.90 | 6000 | 4.88 | 0.14 | 0.10 | 24.61 | 26.00 | 10.00 |
MX3510AB(S)L5 | B.S | 5 | 3.5-5.5 | 0.12 | 0.60 | 4000 | 3.15 | 0.09 | 0.04 | 11.18 | 22.00 | 10.00 |
MX3510AB(S)H1 | B.S | 12 | 7.0-13.8 | 0.18 | 2.16 | 10000 | 7.48 | 0.21 | 0.22 | 54.23 | 32.00 | 10.00 |
MX3510AB(S)M1 | B.S | 12 | 7.0-13.8 | 0.14 | 1.68 | 8000 | 6.51 | 0.18 | 0.16 | 39.42 | 29.00 | 10.00 |
MX3510AB(S)L1 | B.S | 12 | 7.0-13.8 | 0.10 | 1.20 | 6000 | 4.88 | 0.14 | 0.10 | 24.61 | 26.00 | 10.00 |
B: Electrical Specification:
ITEM |
| Specification. Condition | |||
Locked Rotor Protection | □ | Safety Condition | |||
| Auto power off after locked at rated voltage for 1sec | ||||
Polarity Protection | ■ | Open circuit when Vcc&GND are exchanged | |||
□ | Circuit won’t be burned within 5 seconds when Vcc &GND are exchanged | ||||
Insulation Resistance | 10MΩ Between unshielded wire and frame at 500VDC/min | ||||
Dielectric Strength | 5mA Max/ Measured b/w lead wire(+)and frame at 500VAC/min | ||||
Special Function | □ | Soft Start | □ | Current Limiter |
C. (Main Materials, Parts Specification)
Bearing | ■(Dual Ball Bearing) | □ | (Sleeve Bearing) | |||||||
Frame | ■ | PBT of UL94V-0. | □ | Die-cast Aluminum Alloy | ||||||
Impeller | ■ | PBT of UL94V-0. | □ | Steel | ||||||
Bobbin | PBT of UL94V-0. | |||||||||
Lead Wire | ■ | Red(+) | ■ | Black(-) | □ | Blue(PWM) | UL 1571 28# | |||
□ | Yellow(FG) | □ | White(RD) | 2 wires 100±10mm | ||||||
Connector | No | |||||||||
Tube | No |
Dimensions (Unit:mm)